In SOW but Missing from ICD

• Set device name

  • Not currently supported

  • FN/Jabil to discuss further

  • Awaiting follow up from FN/Jabil on if/when it will be supported

• Set default username

  • Implemented as “Shooter Name Training Parameter” but stricken from ICD

  • Not currently supported

  • Awaiting follow up from Jabil on if/when it will be supported

  • Supported as of ICD Rev F with current firmware

• Set computer vision model

  • Awaiting follow up from Jabil on how to read this from the device

• Set computer vision application

  • Not currently supported

  • Awaiting follow up from Jabil on if/when it will be supported

• Set mounting orientation

  • Is in fact “VictoR Mounting Orientation Training Parameter Structure”

  • Is stricken from the ICD, but it is implemented with the caveat that it is unstable

  • Awaiting follow up from Jabil on when it will be stabilized

  • Supported as of ICD Rev F with current firmware

  • Requires a device reboot to take effect

• Enable/Disable physical buttons

  • Not currently supported

  • Awaiting follow up from Jabil on if/when it will be supported

• Set sleep mode timer

  • Implemented as “Minimum Inactivity Interval General System Parameter” but stricken from ICD

  • Not currently supported

  • Awaiting follow up from Jabil on if/when it will be supported

  • Supported as of ICD Rev F with current firmware

ICD Clarification: Device Information Service

• Notify Battery Level

  • Would like to know/verify what percentages trigger this

  • Awaiting follow up from Jabil with percentages

  • Appears to notify approximately once per second regardless of percentage

• Trained NN Model File

  • There is a read but no write

  • Awaiting follow up from Jabil on how to change this

ICD Clarification: Device Configuration Service

• System Power Command

  • ICD says this is read/write but Jabil (Scott) is unsure if read support is a typo

  • If read is supported, need clarification on what exactly that means - read back of last command issued?

  • Awaiting further clarification from Jabil

  • Supported as of ICD Rev F with current firmware

  • Always reads as 0

ICD Clarification: Object Transfer Service

• File Write/List/Info/Delete Command Classes

  • Stricken from ICD

  • Jabil says it will be supported

  • Need an estimate on completion/availability

  • Supported as of ICD Rev F with current firmware

ICD Clarification: USB Interface

...