...
ID | Name | Description | |
|---|---|---|---|
5.1 | Device Configuration Service | The FN VictoR SDK shall provide developers with a multi-platform, multi-protocol Device Configuration Service that allows for reading and writing of device configuration parameters to and from an FN Victor device over a common interface. | |
5.2 | Read Optical Path Video Parameter | The Device Configuration Service shall provide the ability to get the optical path video parameter from an FN VictoR device as a value indicating short-range, long-range, or auto-range. | |
5.3 | Write Optical Path Video Parameter | The Device Configuration Service shall provide the ability to set the optical path video parameter (optical path field) of an FN VictoR device to a value indicating short-range, long-range, or auto-range. | |
5.4 | Read Bluetooth Link General System Parameter | The Device Configuration Service shall provide the ability to get the Bluetooth link general system parameter from an FN VictoR device as a value indicating disabled or enabled. | |
5.5 | Write Bluetooth Link General System Parameter | The Device Configuration Service shall provide the ability to set the Bluetooth link general system parameter of an FN VictoR device to a value indicating disable or enable. | |
5.6 | Read System LED General System Parameter | The Device Configuration Service shall provide the ability to get the system LED general system parameter from an FN VictoR device as a value indicating disabled or enabled. | |
5.7 | Write System LED General System Parameter | The Device Configuration Service shall provide the ability to set the system LED general system parameter of an FN VictoR device to a value indicating disable or enable. | |
5.8 | Read Buzzer General System Parameter | The Device Configuration Service shall provide the ability to get the buzzer general system parameter from an FN VictoR device as as a value indicating disabled or enabled. | |
5.9 | Write Buzzer General System Parameter | The Device Configuration Service shall provide the ability to set the buzzer general system parameter of an FN VictoR device to a value indicating disable or enable. | |
5.10 | Read System Time | The Device Configuration Service shall provide the ability to get the system time from an FN VictoR device as a Unix Epoch formatted timestamp. | |
5.11 | Write System Time | The Device Configuration Service shall provide the ability to set the system time of an FN VictoR device to a Unix Epoch formatted timestamp. | |
5.12 | Read VictoR Mounting Orientation Training Parameter | The Device Configuration Service shall provide the ability to get the Picatinny rail mounting position from an FN VictoR device as a value indicating a position defined with respect to the muzzle of either above (12 o’clock), below (6 o’clock), left (9 o’clock), or right (3 o’clock). | |
5.13 | Write VictoR Mounting Orientation Training Parameter | The Device Configuration Service shall provide the ability to set the Picatinny rail mounting position of an FN VictoR device to a value indicating a position defined with respect to the muzzle of either above (12 o’clock), below (6 o’clock), left (9 o’clock), or right (3 o’clock). | |
5.14 | Read Aimpoint Offsets Training Parameter | The Device Configuration Service shall provide the ability to get the aimpoint offsets training parameter from an FN VictoR device as a column offset +/- the maximum image width and a row offset +/- the maximum image height. | |
5.15 | Write Aimpoint Offsets Training Parameter | The Device Configuration Service shall provide the ability to set the aimpoint offsets training parameter of an FN VictoR device to a column offset +/- the maximum image width and a row offset +/- the maximum image height. | |
5.16 | Read Shot Rejection Angle Training Parameter | The Device Configuration Service shall provide the ability to get the shot rejection angle training parameter from an FN VictoR device as an angle between 0 and 90 degrees. | |
5.17 | Write Shot Rejection Angle Training Parameter | The Device Configuration Service shall provide the ability to set the shot rejection angle training parameter of an FN VictoR device to an angle between 0 and 90 degrees. | |
5.18 | Read System Power Command | The Device Configuration Service shall provide the ability to get whether the last system power command sent to an FN VictoR device was to power off or to reboot system. | |
5.19 | Write System Power Command | The Device Configuration Service shall provide the ability to send a system power command to an FN VictoR device indicating it should power off or reboot system. | |
5.20 | Read Vision System Command | The Device Configuration Service shall provide the ability to get whether the last vision system command sent to an FN VictoR device was a “target recognition system control” command or a “get a shot clip” command. | |
5.21 | Write Vision System Command | The Device Configuration Service shall provide the ability to send a vision system command to an FN VictoR device as either a “target recognition system control” command or a “get a shot clip” command. | |
5.22 | Read Target Recognition System Control Vision System Command Data | The Device Configuration Service shall provide the ability to get the last vision system command data sent to an FN VictoR device as either a value indicating “interface engine control stop” or “interface engine control start” if the command was a “target recognition system control” command. | |
5.23 | Read Shot Clip Vision System Command Data | The Device Configuration Service shall provide the ability to get the last vision system command data sent to an FN VictoR device as a value indicating the shot identifier if the command was a “get a shot clip” command. | |
5.24 | Write Target Recognition System Vision System Command Data | The Device Configuration Service shall provide the ability to set the vision system command data sent to an FN VictoR device as either a value indicating “interface engine control stop” or “interface engine control start” if the command was a “target recognition system control” command. | |
5.25 | Write Shot Clip Vision System Command Data | The Device Configuration Service shall provide the ability to set the vision system command data sent to an FN VictoR device as a value indicating the shot identifier if the command was a “get a shot clip” command. | |
5.34 | Read Detection Threshold Target Recognition System Parameter | The Device Configuration Service shall provide the ability to get the detection threshold target recognition system parameter from an FN VictoR device as a percentage between 0 and 100. | |
5.35 | Write Detection Threshold Target Recognition System Parameter | The Device Configuration Service shall provide the ability to set the detection threshold target recognition system parameter of an FN VictoR device to a percentage between 0 and 100. |
...