In SOW but Missing from ICD
Set device name
Not currently supported
FN/Jabil to discuss further
Awaiting follow up from FN/Jabil on if/when it will be supported
Set default usernameImplemented as “Shooter Name Training Parameter” but stricken from ICDNot currently supportedAwaiting follow up from Jabil on if/when it will be supportedSupported as of ICD Rev F with current firmware
Set computer vision model
Awaiting follow up from Jabil on how to read this from the device
Set computer vision application
Not currently supported
Awaiting follow up from Jabil on if/when it will be supported
Set mounting orientationIs in fact “VictoR Mounting Orientation Training Parameter Structure”Is stricken from the ICD, but it is implemented with the caveat that it is unstableAwaiting follow up from Jabil on when it will be stabilizedSupported as of ICD Rev F with current firmware
Requires a device reboot to take effect
Enable/Disable physical buttons
Not currently supported
Awaiting follow up from Jabil on if/when it will be supported
Set sleep mode timerImplemented as “Minimum Inactivity Interval General System Parameter” but stricken from ICDNot currently supportedAwaiting follow up from Jabil on if/when it will be supportedSupported as of ICD Rev F with current firmware
ICD Clarification: Device Information Service
Notify Battery LevelWould like to know/verify what percentages trigger thisAwaiting follow up from Jabil with percentagesAppears to notify approximately once per second regardless of percentage
Trained NN Model File
There is a read but no write
Awaiting follow up from Jabil on how to change this
Last Holster Draw Information
Listed in ICD, but reported as not currently supported by Jabil
Awaiting follow up from Jabil on if/when it will be supported
...
System Power CommandICD says this is read/write but Jabil (Scott) is unsure if read support is a typoIf read is supported, need clarification on what exactly that means - read back of last command issued?Awaiting further clarification from JabilSupported as of ICD Rev F with current firmware
Always reads as 0
Trigger Detection Parameters
Deprecated in ICD Rev G and replaced with Threshold-Based Trigger Detection Parameters
ICD Clarification: Aimpoint Data Service
...
File Write/List/Info/Delete Command ClassesStricken from ICDJabil says it will be supportedNeed an estimate on completion/availabilitySupported as of ICD Rev F with current firmware
ICD Clarification: USB Interface
...
Device Information Service is not supported over USB.
Per Jabil’s firmware v03.80 release notes:
The VictoR Device Information Service characteristics are not currently supported via USB tethering.