FN Controller - At Risk MVP

1.2.4. Oblique Processing (MVP_011 - MVP_012)

1.2.4.1. Fix shot trace orientation when firing at oblique angles

WBA

MVP

CATEGORY

FEATURE

1.2.4

MVP_011

Oblique Processing

As a operator I expect the software set the rendering of the target always flat including the process of the trace even when I shoot with a oblique angle so that the results are easy to see.

(Scoring and predicted point of impact shall be consistent with target orientation)

1.2.4

MVP 012

Oblique Processing/ Image Download

As a operator I can download the image of each shot separately so that I can visualize the context and angle of target engagement.

1.2.5. IMU Data (MVP_013)

1.2.5.1. Use prediction point as start point then use IMU data for shot trace rendering and filtering for better resolution

WBA	MVP	CATEGORY	FEATURE
1.2.5	MVP_013	IMU data	IMU data must be used in place of using predicted point of impact (extracted from Aimpoint service) for drawing the trace. A filter needs to be applied to avoid unwanted spurious movement of the gun.

1.2.9. Previous Session (MVP_020)

1.2.9.1. Download previous sessions from device

WBA	MVP	CATEGORY	FEATURE
1.2.9	MVP_020	Previous session	As a user, I can download a previously completed session completed in "Standalone mode" so that I can see and analyze my session on a controller device.

1.2.13. Moving Target (MVP_036 - MVP_037)

1.2.13.1. Display distance, speed, and direction of target, data is received from VictoR WASP
1.2.13.2. Display predicted point of impact to accommodate moving target

WBA	MVP	CATEGORY	FEATURE
1.2.13	MVP 036	Moving target	The system shall display the distance, speed, and direction of a moving pretrained target [display vector graphic on direction of movement, and speed]
1.2.13	MVP 037	Moving target	The system shall augment the display of the predicted point of impact to accommodate for a pretrained moving target